The DEM (R16 with mips, 44 MB) was read only by terrain_generate and kept for the map's life; a
world swap loads its own again. The height-field sun shadow was one RGBA32F for three values and an
unused fourth: the lowest lit height stays 32-bit (a receiver 3000 m up compares against it to a
quarter metre), the occluder distance and the cloud mask go beside it in RG16F (64 -> 32 MB), baked
in a pass of their own (TS_AUX): a pipeline takes one colour format for all its targets, and drawn
together into R32F + RG16F the writes went nowhere and nothing was lit.
-75 MB at every fog level, off included (2008 -> 1933 MB at the overlook); the fog-off frame is
unchanged (0 pixels over 8).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every lit program blends toward the horizon colour (the prefiltered sky with the sun's inscatter,
so it carries the day's grade); the sky's horizon band is pulled to the same colour, wider the
closer the wall. The far plane, scatter and stream cull reach and the shadow cascades are clamped
to the wall; the reflection pass shares the shaders and the cull. 0 is off: every branch is gated
on u_fog_wall > 0 and r3d_reach hands back the far it was given. R3D_FOG_WALL=<m> for a shot.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The atlas is white glyphs on alpha and the overlay reads only the coverage,
but it was uploaded RGBA8: Maroon Lake's 3072 x 2688 atlas was 43 MB of Metal
memory with its mips, the largest single thing in the launcher window.
overlay_font now keeps the alpha alone as R8 (ov_font_tex; any other PNG
shape is uploaded as before) and overlay.frag reads .r - the white fallback
texture reads 1 there as it did from .a.
Launcher window, graphics regions: the atlas 43.0 -> 11.5 MB; process
footprint at 25 s 402 -> 378 MB. The headless launcher shot is identical to
the unchanged build's (0 pixels differ; two unchanged runs differ from each
other by 1.69%, and the new one by the same against them).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A slice has carried { ptr, len, cap } since it existed and nothing ever read
the len: every index emitted a bare getelementptr. Running off the end of one
wrote into whatever the allocator had put next, and the program died somewhere
else entirely - a maroon-lake crash took a day to find because the stack named
a texture upload and the write was in a telemetry buffer five frames earlier.
Now each index loads the length and compares unsigned, which rejects a negative
index in the same instruction, and a failure aborts with the location the other
located errors use:
oob.ludic:9: index out of range: 7, len 3
`words` and the other raw buffers are unchanged - they are a bare malloc with no
length to check, which is the argument for moving off them.
The SPIR-V variants are regenerated in the same commit: shaders --check was
failing against the edited GLSL.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The grass had a gust built from two sines; the trees had no gust term AT ALL, only a
per-instance wobble. So the meadow rippled and the canopy above it swayed to an unrelated
rhythm, and nothing ever crossed the valley.
wind.glsl is prepended to every stage (programs.ludic, and shaders.ludic for the SPIR-V
build) so grass, crowns and water read the same field at the same world position. It
declares no uniforms on purpose: u_time and u_wind already exist in several of those
files and redeclaring them is a compile error in whichever stage includes both.
The wavelength is what made it work. At 0.030 the front was 209 m crest to crest -
longer than the meadow you can see - so the whole frame sat in one phase and the gust
read as everything breathing together. At 0.085 it is 74 m and a front crosses a view in
a couple of seconds.
R3D_DEBUG_WIND=1 paints the field on the ground. It is the only honest way to show a gust
in a still image, and two shots 0.3 s apart move by 39/255.
400 frames: GL 6.9 s, VK 7.2 s. Backends agree to 0.68/255.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Aerial perspective is a curve now. A low sun shines through far more air than a
high one and shines ALONG the ground rather than down onto it, so density, height
falloff and forward scatter all ride the sun's elevation; overcast thickens the air
and flattens the scatter, because a grey sky has no disc to scatter from. `lowsun`
falls away BELOW the horizon as well as above it, or the middle of the night gets a
dawn's haze with no dawn to justify it.
The term that was missing entirely is distance DESATURATION. Blending a saturated
green ridge toward a saturated blue noon sky leaves a saturated ridge - which is why
the same valley read as a photograph at dusk, where the fog colour happened to be a
warm grey, and as a toy at one o'clock. A surface is now pulled toward its own
luminance faster than the fog itself arrives. Measured far/near saturation at the
camp: 07:00 1.11 -> 0.89, 09:00 1.04 -> 0.93, 13:00 0.98 -> 0.89.
The grade is the hour's too - nine literals bound at the draw, written by
daylight_set now. Noon is the case worth naming: direct sun is warm-white and the
only thing filling a midday shadow is a blue sky, so noon gets a cool balance over a
blue-lifted shadow with hard contrast, and dawn and dusk the reverse. Ground R-B,
lit vs shadowed: 07:00 +42.8/+14.2 -> +48.9/+15.1, 13:00 +32.2/+14.8 -> +25.2/+2.9.
Gain is left alone deliberately: the grade is `c * gain + lift * (1 - c)`, so warming
it warms the whole frame, and warming it at noon made one o'clock yellower than seven
in the morning - the opposite of the point.
The visible sky is relit. Turning a photograph on its axis does not change what
colour it was taken at, so every sunset had a mid-morning blue overhead. An analytic
sky supplies the chroma and the photograph keeps the luminance: the cloud stays where
it is and goes orange at dusk, the zenith goes deep blue at noon, and no second sky
is shipped. It fades out under the horizon and eases off under cloud.
The ground bounce follows the ground, crossing meadow to rock at the map's treeline
instead of being one green constant everywhere including above the scree.
R3D_NOAIR=1 restores all of it, so a before-and-after comes from one binary at one
hour; it joins R3D_NOCLOUD / R3D_NOSHADOW / R3D_NOGI.
Verified on macOS OpenGL, macOS Vulkan (MoltenVK) and Windows Vulkan (RTX 3070 Ti).
Backends agree: mean difference 0.15-0.88/255 within a machine. Across machines the
ORIGINAL renderer already differed by 5.02/255 at 19:12 and this build differs by
2.80, so cross-platform variance is pre-existing and did not grow. 400 frames: GL
7.4 s before and after, VK 7.0 s before and after.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
r3d_hdr_calibrate(peak, paper, black) feeds the tonemap's and the overlay's HDR10 variants and
the display's HDR metadata; ov_hdr_nits draws a calibration patch at a number of nits.
gpu_caps_probe asks the running Vulkan renderer's instance instead of making and destroying a
second one under Streamline's interposer, which left the next swapchain rebuild calling address 0.
The overlay gets an HDR10 variant, and the tonemap brightens HDR highlights by one factor rather
than per channel.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
HDR output: an HDR10 swapchain (A2B10G10R10, ST 2084 over BT.2020) when the
setting asks and the display offers it, with HDR metadata. The tonemap's HDR10
variant keeps the SDR picture up to a 200-nit paper white and rolls highlights
on to 1000 nits; the overlay's converts the interface to the same white. The
screen and LDR images go 10-bit with it; screenshots refuse while it is on.
OpenGL and the Vulkan SDR frame are unchanged. The instance asks for
VK_EXT_swapchain_colorspace. HDR metadata only where the loader has
vkSetHdrMetadataEXT: Streamline's interposer does not, and calling the thunk
crashed the game the moment the swapchain came up HDR10. PC 4K monitor: HDR10,
validation 0. R3D_HDR overrides the setting.
DLSS:
- the vertical jitter offset flips with Streamline's image (rows from the top):
unflipped, Quality resolved the ground into concentric rings;
- preset K in every mode: the default M put Performance at 18 ms a frame at 4K
on an RTX 3070 Ti (33 fps against 41 with DLSS off; with K, 60);
- the camera is jittered only while this frame holds a token and the last
evaluate worked.
R3D_DLSS_PRESET, R3D_CAM_LOG (the camera and DLSS state a frame) and
R3D_NOGRAIN for measuring.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
